Kenmore – How to Replace Filter, Soap Dispenser & Drain Pump

Are you experiencing problems with your Kenmore dishwasher? Don’t Worry In this article, we will guide you through the process of replacing the dishwasher filter, Soap Dispenser, and Drain Pump ensuring that your dishwasher continues to operate at its best.

how to replace kenmore dishwasher filter

To replace the filter in a Kenmore dishwasher, follow these steps:

1. Turn off the power to the dishwasher by switching off the circuit breaker that supplies it.
2. Open the dishwasher door and locate the filter assembly at the bottom of the dishwasher tub. The filter assembly is usually located near the back or side of the tub.
3. Remove the lower rack from the dishwasher to access the filter assembly more easily.
4. Depending on your Kenmore dishwasher model, the filter assembly may consist of multiple parts. Start by removing any large debris from the filter assembly, such as food particles or foreign objects. Use a soft brush or cloth to clean the filter assembly if necessary.
5. If your dishwasher has a mesh or screen filter, remove it by twisting it counterclockwise or lifting it out, depending on the design. Some filters may also have a release latch or button that needs to be pressed to remove them.
6. Once the old filter is removed, install the new filter by reversing the process. Insert the new filter into the designated slot and twist it clockwise or snap it into place, depending on the design.
7. Make sure the filter is securely in place before reassembling the lower rack and closing the dishwasher door.
8. Restore power to the dishwasher by switching on the circuit breaker.
9. Run a test cycle to ensure that the dishwasher is functioning properly and that the new filter is working effectively.

Refer to the Kenmore dishwasher’s user manual for specific instructions and diagrams, as filter replacement methods may vary slightly depending on the model.

how to replace kenmore dishwasher soap dispenser

To replace the soap dispenser in your Kenmore dishwasher, please follow these steps:

1. Switch off the dishwasher and unplug it from the power source for safety.

2. Open the dishwasher door fully and locate the soap dispenser cover on the inside of the door.

3. Remove any items stored in the door compartment or rinse aid dispenser, if applicable.

4. Depending on the model, you may need to unscrew the soap dispenser cover using a screwdriver or release the latch mechanism to detach it.

5. Once the cover is removed, you should see the soap dispenser assembly inside.

6. Carefully disconnect any wires or hoses connected to the dispenser by pulling them gently, keeping in mind how they are connected.

7. Take note of the position of any tabs or locking mechanisms securing the dispenser assembly in place.

8. Release the tabs or unlock the mechanism, and carefully lift or slide out the old dispenser assembly.

9. Install the new soap dispenser assembly by aligning it with the same tabs or locking mechanisms as the old one.

10. Reconnect any wires or hoses that were detached earlier, ensuring they are securely in place.

11. Replace the soap dispenser cover and secure it with screws or by latching it back into place.

12. Plug the dishwasher back into the power source and switch it on.

Your Kenmore dishwasher’s soap dispenser should now be replaced and ready for use.

how to replace kenmore dishwasher drain pump

To replace the drain pump in a Kenmore dishwasher, follow these steps:

1. Turn off the power to the dishwasher by unplugging it or switching off the circuit breaker connected to the dishwasher.

2. Open the dishwasher door and remove the lower rack.

3. Locate the drain pump at the bottom of the dishwasher. It is usually located near the drain hose.

4. Disconnect the drain hose from the pump. Depending on the model, you may need to use pliers or a wrench to loosen the hose clamp before sliding the hose off the pump.

5. Remove any mounting screws that are securing the pump to the dishwasher cabinet or base. These screws may be located at the front, sides, or bottom of the pump.

6. Carefully lift the old drain pump out of the dishwasher, taking note of how it is positioned.

7. Take the new drain pump and position it in the same way as the old pump was placed.

8. Secure the new drain pump in place by reinstalling the mounting screws.

9. Reconnect the drain hose to the new pump, ensuring it is secure and the hose clamp is tightened.

10. Double-check all connections and ensure the pump is positioned correctly.

11. Close the dishwasher door and plug in the power or switch on the circuit breaker.

12. Test the dishwasher by running a short cycle to ensure the new drain pump is working properly and there are no leaks.

Note: It is important to consult the user manual or manufacturer’s instructions specific to your Kenmore dishwasher model for detailed instructions and any additional steps specific to your dishwasher’s design.

Dishwasher Cleaning & Maintenance Tips

1. Regular Cleaning: Clean the interior of your dishwasher regularly to remove any debris or food particles. Wipe down the door, racks, and walls with a damp cloth or sponge.
2. Scrape Off Food Residues: Before loading your dishes, scrape off large food residues to prevent them from clogging the dishwasher filter and drainage system.
3. Load the Dishwasher Properly: Place dishes, glasses, and utensils in the designated racks, ensuring that they don’t block the spray arms. Overloading the dishwasher can hinder proper water circulation and affect the cleaning performance.
4. Use the Right Dishwashing Detergent: Use high-quality dishwasher detergent that is specifically designed for automatic dishwashers. Avoid using regular dish soap or handwashing detergents, as they can create excessive suds and damage your dishwasher.
5. Run Full Loads: Optimize energy and water usage by running your dishwasher only when it’s full. Running partial loads wastes resources and increases your utility bills.
6. Avoid Dishwasher-Safe Items: Certain materials, such as delicate glassware, wooden utensils, and non-dishwasher-safe plastics, can be damaged in the dishwasher. Check the manufacturer’s instructions before placing items in the dishwasher.
7. Maintain the Dishwasher Filter: Clean or replace the dishwasher filter regularly to prevent clogs and ensure proper drainage. Refer to your dishwasher’s manual for instructions on how to remove and clean the filter.
8. Check the Spray Arms: Inspect the spray arms for any blockages or debris. Clear any obstructions to ensure that water can flow freely and reach all the dishes.
9. Check the Water Temperature: Hot water is essential for effective cleaning. Make sure your dishwasher is connected to a hot water supply and adjust the water heater temperature to around 120°F (49°C) for optimal results.
10. Inspect and Clean the Door Gasket: The door gasket forms a seal to prevent water leaks. Regularly inspect it for any signs of damage or mold growth. Wipe it clean with a damp cloth and mild detergent if needed.
11. Run Vinegar or Dishwasher Cleaner Cycles: Periodically run an empty dishwasher cycle with vinegar or a dishwasher cleaner to remove mineral deposits, grease, and odors. Follow the product instructions for the recommended amount and placement.
12. Regular Maintenance: Check your dishwasher’s components, such as the spray arms, racks, and door hinges, for any signs of wear or damage. Replace any faulty parts promptly to maintain optimal performance.

By following these dishwasher care tips, you can extend the lifespan of your appliance and enjoy clean and spotless dishes every time. Remember to consult your dishwasher’s manual for specific care instructions and recommendations from the manufacturer.