In this Troubleshooting guide, we will show you a step-by-step process of How to Fix Kenmore Dishwasher not Spraying Water.
Kenmore Dishwasher not Starting
There could be several reasons why a Kenmore dishwasher is not starting. Here are some troubleshooting steps you can follow:
1. Check power supply: Make sure the dishwasher is properly plugged into a functioning electrical outlet. If it is, try plugging in another appliance to ensure the outlet is working.
2. Check circuit breaker: Check the circuit breaker or fuse panel to see if a circuit breaker has tripped or a fuse has blown. Reset the breaker or replace the fuse if necessary.
3. Check door latch: The dishwasher will not start if the door latch is not securely closed. Make sure the door is closed properly and the latch is engaged.
4. Check control panel: Inspect the control panel for any error codes or indicators. If there are any, consult the dishwasher’s manual for troubleshooting instructions.
5. Check delay start option: Some Kenmore dishwashers have a delay start feature that allows you to start the dishwasher at a later time. Make sure this option is not activated.
6. Check water supply: Ensure that the water supply valve is fully open and water is flowing into the dishwasher.
7. Test cycle selector switch: Turn the cycle selector switch to a different setting and then back to the desired cycle to see if it starts.
8. Check float switch: The float switch can sometimes get stuck, which can prevent the dishwasher from starting. Locate the float switch (usually at the bottom of the dishwasher) and make sure it moves freely.
9. Reset the dishwasher: If none of the above steps work, try resetting the dishwasher by unplugging it from the power source for a few minutes and then plugging it back in.
If none of these steps resolve the issue, it may be necessary to consult the Kenmore support or call a professional appliance repair service.