Kenmore Dishwasher not Draining [Troubleshooting Guide]

In this Troubleshooting guide, we will show you a step-by-step process of How to Fix  Kenmore Dishwasher not Spraying Water.

Kenmore Dishwasher not Draining

There are several possible reasons why a Kenmore dishwasher may not be draining properly. Here are some troubleshooting steps to help diagnose and fix the problem:

1. Check the drain hose: Make sure the drain hose is not kinked or clogged. Remove the hose and clean it if necessary. Ensure it is properly attached to the dishwasher and the sink drain.

2. Check the air gap: If your dishwasher has an air gap, make sure it is not clogged. Clean it out if necessary. The air gap is usually located on the sink countertop or near the garbage disposal.

3. Check the garbage disposal: If your dishwasher is connected to a garbage disposal, make sure it is not clogged. Run the disposal to see if it clears any blockage.

4. Clean the dishwasher filter: Remove the bottom rack and locate the dishwasher filter. Clean it by removing any debris or food particles. A clogged filter can prevent proper drainage.

5. Check the drain pump: The drain pump may be clogged or faulty. Consult the dishwasher’s manual for instructions on how to access and clean the drain pump. If necessary, replace the drain pump.

6. Check the drain valve: The drain valve may be stuck closed, preventing the water from draining. Test the valve or consult the manual for instructions on how to check and replace it if necessary.

7. Check the float switch: The dishwasher’s float switch may be stuck, preventing the dishwasher from draining. Locate the float switch and ensure it moves freely and is not obstructed by any debris.

If after following these steps the dishwasher still does not drain, it may be necessary to contact a professional technician for further assistance or consider replacing the dishwasher.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *